top of page

Why Is Manufacturing So Heavily Targeted by Cyber Attacks?

5 days ago
8 min read

Updated: 2 days ago


Manufacturing has consistently ranked as the most targeted sector. In fact, according to IT 365, Manufacturing has been the most cyber-attacked industry in the world for the last five years.



We're approaching 2027 and businesses are increasingly reliant on computers and technology– and rightly so!


However, cyber criminals are growing in confidence and knowledge. We wouldn’t go as far as to call them smart, but they are becoming ever-more aware of how businesses operate in the modern-day world. This means their attacks are becoming increasingly targeted and they know where to hit businesses where it hurts.


Due to this, there is now a direct correlation between cyber security, production and business continuity.


Manufacturers, and perhaps other UK businesses, will now be asking themselves: why always us?


Why is the manufacturing industry a prime target for cyber criminals?

According to Make UK, manufacturers in the UK are under pressure due to rising costs of doing business. There is a cautious approach being adopted across the board with many firms reluctant to make hiring or expansion decisions with confidence, and cyber criminals are picking on manufacturers because of this, as they can sense a weakness and vulnerability that perhaps wasn’t there before. Perhaps it is also true that due to these pressures, manufacturers' focuses are directed away from cyber security.


Here, we’ll chat through three key reasons that we believe make manufacturers prime targets for a cyber attack.


The knock-on effect of a cyber attack is significant and can impact suppliers up and down the chain.


Picture this – you have an order to go out but a cyber attack halts production. This means the order doesn’t go out on time which impacts the buyer. The buyer will likely have their own buyer waiting for the product. If the part doesn’t arrive on time, both buyers are left waiting. This creates supply chain pressure.


The knock-on effect here is that businesses may decide to purchase the part elsewhere in the future, which leads to loss of business, reputational damage and financial pressure.

In addition, without a tried and tested cyber incident response plan, cyber criminals will look to exploit again as you try to re-launch your production. There will likely be some form of panic element as well – again, another weakness that they will attempt to exploit. Steps may be forgotten and / or missed and without a proper cyber incident response plan, there may be no way of tracking this.


We have a whole host of cyber detection response solutions, which you can view here.


And that’s just reason one!


Reason two focuses on the valuable UK manufacturing companies hold. Data such as product designs, manufacturing processes (which cyber criminals will use to re-attack in the future), engineering plans and commercial information are all valuable for cyber criminals.

Lastly, cyber criminals will know that manufacturers may still be using legacy and complex IT systems. Nearly three quarters of manufacturing businesses still rely on legacy systems.


These are, typically, easier to target and exploit and longer to rebuild.

Legacy IT Systems

How has digital transformation increased cyber security risks in manufacturing?

Manufacturing has changed considerably over the years. Many businesses now rely on connected machinery, automated production lines and software to manage everything from stock levels to production schedules. While these technologies can improve efficiency, productivity and visibility across operations, they also introduce additional systems that need to be protected.


Smart factories and connected machinery

Modern factories increasingly use automated machinery and computer-controlled production lines. Here, machinery can communicate with other equipment and systems, allowing the business to monitor production, identify faults as early as possible and improve efficiency.


However, connecting machinery to wider networks can create additional entry points for cyber criminals if security isn’t properly managed. For example, a poorly secured connected device could potentially provide an attacker with a route into other parts of a business network.


Industrial Internet of Things (IIoT) devices and sensors

IIoT refers to internet-connected devices used in industrial environments. These might include sensors that monitor temperature, pressure, equipment performance or production conditions. They allow manufacturers to collect information in real time and identify potential problems before they affect production.


However, every connected device must be properly secured. Poor configurations, outdated software or weak password can introduce vulnerabilities.

Manufacturing software (MES and ERP systems)

Manufacturers will often rely on specialist software to manage their operations. Manufacturing Execution Systems (MES) help businesses monitor and manage what happens on the production floor, including production progress and machine performance.


Enterprise Resource Planning (ERP) systems help manage wider business activities, such as purchasing, stock, finances, orders and supply chains.


These systems often contain valuable operational and commercial information, making them attractive targets for cyber criminals.


And if compromised, they could disrupt production planning, stock management, order processing and other business-critical activities.


Understanding the difference between IT and OT

Information Technology (IT)

The technology used to manage business information and everyday operations. Examples here include: emails, computers, business applications, servers, communications and customer data.


Operational Technology (OT)

This is technology used to monitor and control physical machinery, equipment and industrial processes.


Examples can include production line controls, industrial sensors, programmable logic controllers (PLCs) and automated machinery.


A manufacturer may use IT systems to manage customer orders and production schedules, while OT systems control the machinery responsible for producing those orders. By connecting the two, you are allowing information to flow between the office and factory floor.


This makes operations much more efficient which is great, but it also means businesses must now consider the security of both environments. A vulnerability in one system could potentially provide an opportunity for attackers to access other connected systems.

While digital transformation brings significant operational benefits, it also increases the importance of having appropriate security measures in place. Understanding how these technologies interact is an important first step towards identifying and managing potential vulnerabilities.


What Are the Biggest Cyber Attacks Facing Manufacturing Businesses?

Manufacturers face many of the same cyber threats as other businesses, but the impact can be particularly serious when an attack affects production, machinery, stock management and, subsequently, the whole supply chain. Threats will target employees directly while others may exploit weaknesses in business systems and / or software.

Let’s take a look at some of the biggest threats facing UK manufacturers today…


Ransomware

This is a type of malicious software that prevents a business from accessing its files or systems by encrypting data and then demanding payment to restore access. Often, cyber criminals will gain access through phishing emails or an unpatched vulnerability. Once inside, they work their way through the connected systems, encrypting files as they go.


If systems supporting all forms of production and stock management go down, then manufacturers will struggle to continue operating. Even if machinery itself isn’t affected, losing access to systems that coordinate and hold together production can cause significant disruption.


Criminals will also seek access to sensitive information held by the company. This could be employee details or customer information. Ransomware is no longer solely an IT problem, it is an operational problem that impacts all aspects of business.


Phishing and Social Engineering

90% of successful cyber attacks have some form of phishing involves, making it an extremely common method of attack for cyber criminals. This is when criminals use fraudulent emails to trick employees into revealing information or clicking malicious links. Often these emails will look extremely professional to the naked eye, have a sense of urgency and be demanding something like contact details or payment.


An example of a phishing email.
An example of a phishing email.

When directing recipients to the link, it’ll often take them to a fake login page, aiming to capture details here. Once compromised, an attacker can gain access to emails, documents and any other connected business system.


Supply Chain and Third-Party Attacks

Manufacturing businesses will work closely with suppliers every day and at every stage of production. Suppliers, maintenance engineers and IT providers may need access to certain systems to deliver services, troubleshoot problems or maintain equipment. However, with every external connection you have, you are introducing another point that must be managed and secured.


If a supplier or contractor has poor security practices, then this creates additional risk for the manufacturer. This is something to always consider before working with external parties.

How can manufacturers protect themselves against cyber threats?

Employee awareness and training

Employees are often the first line of defence against cyber attacks. Therefore, the importance of employee awareness training is paramount. We touched earlier on what to look for in phishing emails. Phishing simulations through platforms such as uSecure are a great way to subtly train employees on the dangers of phishing emails.


Proactive monitoring and threat detection. Businesses cannot wait for something to go wrong before taking action. Monitoring systems such as Huntress or CyberGuard are efficient tools to have on your side. Threat detection helps identify suspicious behaviour and allows specialists to investigate and respond at an early stage.


With downtime being so costly for manufacturers, it demonstrates the importance of having early detection available.

Backups and Incident Response Plans

Regular backups are a simple yet important way to protect yourself against cyber threats. However, they should be tested regularly to ensure that data can actually be restored.

Manufacturers (and any other business) should have a robust and clear incident response plan which outlines who is responsible for what, should an attack occur.


We recently ran a joint event with Cyber & Fraud Centre Scotland and CeeD where we ran through a simulated cyber attack and incident response plan. Click here to read more on this event.


Cyber Security in manufacturing

Why does choosing the right IT and cyber security partner matter?

Well, the short answer here is because your MSP should be an extension of your business and there must be an element of trust between the two.


Manufacturing businesses need IT systems that support their operations, but they also need to understand and manage the security risks associated with them. Having an experienced IT and cyber security partner can help businesses identify vulnerabilities, monitor for threats and respond when incidents occur.


Our managed IT and cyber security service helps businesses remain protected and allows them to focus on what’s important – running their business. While we focus on their cyber security posture behind the scenes.


You can find out more about our managed IT service here and our cyber security solutions here.



Manufacturing is a particularly attractive target for cyber criminals and, unfortunately, this isn’t going to be changing any time soon for a mixture of reasons including the financial value of data held by manufacturing companies, the potential impact of production downtime (and knock-on effects), legacy systems (which are still commonplace amongst UK manufacturers) and the increasingly connected nature of modern-day technology.


Cyber security is no longer something manufacturers can afford to treat as an afterthought. Protecting IT systems is about much more than a first line of defence; it’s about protecting production , employees, customers and your wider supply chain.


For manufacturers, what’s next?


The good news is that you don’t necessarily need to overhaul your entire IT infrastructure overnight, but it is important to understand where your vulnerabilities lie.


It’s essential to adopt a proactive approach to your cyber security posture. This includes employee awareness training, threat monitoring and having the appropriate security measures and incident response plan in place, if needed.


KubeNet helps UK manufacturing businesses with all of the above. We have experience in the sector and therefore understand the unique challenges UK manufacturing businesses will face.


If you want to take a proactive approach against cyber security in 2027 and beyond, you can contact us here.

Comments


bottom of page